INDIVIDUAL MCP TOOL

crosstalk

兩條耦合線的串音：偶／奇模阻抗用 2D 電場數值解，再算近端串音係數 kb、飽和比例、遠端串音係數。只回傳解析式的部分（不含工具頁的 ngspice 時域波形）。

enscon.ainone authenticationAvailability not checked

LIVE ENDPOINT

https://circuit-sim.enscon.ai/mcp

No auth detected

Connect to this endpoint to inspect the live schema for crosstalk and invoke it with your own arguments.

{}

Inferred read-only · medium confidence · heuristic, not a guarantee.

No write-capable action terms were found; this is not proof that invocation has no side effects.

CONNECT WITH APPROVAL

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.circuit-sim]
url = "https://circuit-sim.enscon.ai/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "circuit-sim": {
      "type": "http",
      "url": "https://circuit-sim.enscon.ai/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: circuit-sim
Remote MCP URL: https://circuit-sim.enscon.ai/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "circuit-sim": {
      "url": "https://circuit-sim.enscon.ai/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "circuit-sim": {
      "type": "http",
      "url": "https://circuit-sim.enscon.ai/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "circuit-sim",
  "transport": "streamable-http",
  "url": "https://circuit-sim.enscon.ai/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

impedance — 用 2D 電場數值解算微帶線或帶狀線的差動阻抗（Zdiff、Zcomm、奇／偶模）或單端阻抗（Z0），含銅厚。回傳附適用範圍。
diff_skew — 兩條線的長度差換成時間差（ps），對照介面規範的限制（USB3／PCIe／DisplayPort／HDMI，限制值附原廠文件出處）。
xtal_load_cap — 外掛電容 C1、C2 與雜散電容算出實際負載電容 CL、頻率偏移 ppm、振盪增益餘裕、驅動功率，並給出剛好對上規格 CL 的電容值。
output_voltage_tolerance — 回授電阻分壓的輸出電壓：最壞情況（每項取上下限的所有組合）、RSS 統計；可選蒙地卡羅超規比例。
inrush_current — 負載開關控速上升時的充電電流、峰值電流、能量與脈衝 I²t（mode=slew），或電容直接接電源時的串聯 R-L-C 步階電流（mode=direct）。