Analytics

mcpscores.com

Provides financial and risk analytics for x402 endpoints and MCP servers, including credit scores, wallet authenticity checks, and revenue estimates.

14 endpoints106 known toolsFirst detected August 15, 2026Last detected August 26, 2026

ENDPOINT 1

https://mcpfax-reliability.bowling-anthony.workers.dev/mcp

No auth detected

MCP server metadata

Name: com.mcpscores/agent-reliability-scores
Version: 1.1.0

Capabilities

tools

Server instructions

MCPFax rates x402 endpoints and MCP servers from a continuously collected observation archive: credit grade, payer-concentration and wash risk, observed USDC revenue, payer graph, payTo/terms drift, and a pre-payment preflight check. TOOL CALLS ARE x402-PAID in USDC on Base: send the base64 X-PAYMENT header on this POST /mcp request (PAYMENT-SIGNATURE is accepted as an equivalent alias; send only one). An unpaid call answers with a valid x402 accepts array and settles nothing, and initialize, ping, tools/list and GET /health are free. Use this service before trusting or paying an unfamiliar endpoint, and use mcpfax_integration_drift before paying one you already integrated — a rotated payTo is indistinguishable from a compromised server from the caller's side. COVERAGE IS YOUNG AND STATED HONESTLY: GET /health publishes, free and unprompted, exactly how many subjects each paid route can answer today, so you can decide whether a call is worth making before you make it. Routes refuse with HTTP 422 and settle nothing rather than bill for an answer they cannot support; a refusal is not a failure and costs you nothing. Grades rank observed risk and are not calibrated failure probabilities, not validated over any forward horizon, and not a security audit.

Known tools 7

mcpfax_endpoint_credit_score

Creditworthiness grade for one x402 endpoint or MCP server: letter grade A-E (or NR when unrated), a 0-1000 score, per-component subscores, a confidence level, flags, and the dated evidence each figure rests on.

Inferred read-only

mcpfax_integration_drift

What changed under an x402 endpoint or MCP server you have ALREADY integrated: payTo rotations, price, asset and network changes, terms added or removed, and tool-schema changes.

Inferred read-only

mcpfax_wallet_authenticity

Payer-concentration and wash-risk assessment for a receiving wallet: how concentrated its observed payers are, the measured coverage of that observation, an explicit wash-risk haircut ONLY when coverage is sufficient, how many listings declare the same address, and observed USDC inflow.

Inferred read-only

mcpfax_endpoint_revenue_estimate

Observed on-chain revenue signals for one listing: total USDC inflow, how many distinct payers, the modal transfer size, payment rate, 7- and 30-day trend windows, and where it sits in its cohort by percentile.

Potential side effects

mcpfax_payer_wallet_profile

Know-your-agent profile for a paying wallet: how many distinct services it pays, total observed spend, whether the address is a contract or an externally owned account, and coverage-gated screening signals.

Inferred read-only

mcpfax_payto_change_feed

Chronological feed of rating actions since a date: grade upgrades and downgrades, payTo wallet changes (a seller redirecting payment), listing removals, and returns.

Potential side effects

mcpfax_preflight_check

Check that an endpoint is live and that its terms have not changed, BEFORE you send it an expensive request.

Potential side effects

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.com-mcpscores-agent-reliability-scores]
url = "https://mcpfax-reliability.bowling-anthony.workers.dev/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "com-mcpscores-agent-reliability-scores": {
      "type": "http",
      "url": "https://mcpfax-reliability.bowling-anthony.workers.dev/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: com-mcpscores-agent-reliability-scores
Remote MCP URL: https://mcpfax-reliability.bowling-anthony.workers.dev/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "com-mcpscores-agent-reliability-scores": {
      "url": "https://mcpfax-reliability.bowling-anthony.workers.dev/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "com-mcpscores-agent-reliability-scores": {
      "type": "http",
      "url": "https://mcpfax-reliability.bowling-anthony.workers.dev/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "com-mcpscores-agent-reliability-scores",
  "transport": "streamable-http",
  "url": "https://mcpfax-reliability.bowling-anthony.workers.dev/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

ENDPOINT 2

https://mcpfax-markets.bowling-anthony.workers.dev/mcp

No auth detected

MCP server metadata

Name: com.mcpscores/macro-market-data
Version: 1.1.0

Capabilities

tools

Server instructions

US macro, Treasury yields, FX, crypto spot and Base gas data tools. Paid tools require an x402 payment: send the base64 X-PAYMENT header on this POST /mcp request (or params._meta['x402/payment']), or call the equivalent GET endpoint. tools/list is free.

Known tools 18

us_macro_indicators

US macroeconomic indicators from the St.

Inferred read-only

us_treasury_yields

US Treasury constant-maturity yields for the 2, 10 and 30 year tenors in percent, the computed 10s2s curve spread with an explicit inverted flag, and the 30-year fixed mortgage rate.

Inferred read-only

fx_reference_rates

European Central Bank reference foreign-exchange rates for a chosen base currency, with the ECB observation date.

Inferred read-only

crypto_spot_prices

Coinbase spot price in USD for up to ten crypto assets.

Inferred read-only

stablecoin_peg_deviation

USDC, USDT and DAI spot price against USD plus each one's peg deviation in basis points.

Inferred read-only

base_gas_price

Current Base mainnet gas price read live from JSON-RPC, in both wei and gwei.

Inferred read-only

defi_protocols

Rank DeFi protocols by total value locked from DefiLlama, filtered by chain, category or name substring, with each protocol's slug, category, chain list, TVL in USD, 1d/7d TVL change and market cap.

Inferred read-only

defi_protocol

Full DefiLlama detail for one protocol by slug: current TVL in USD with its observation time, per-chain TVL breakdown, category, token symbol, chain list, description and links.

Inferred read-only

defi_chains

Total value locked per blockchain from DefiLlama, ranked high to low, with each chain's native token symbol and EVM chain id plus the summed cross-chain total.

Inferred read-only

defi_yields

Screen DefiLlama's yield-pool universe by chain, project, token symbol, minimum TVL and stablecoin-only, ranked by APY, returning each pool's stable pool_id, chain, project, symbol, TVL in USD, total/base/reward APY, 30-day mean APY, impermanent-loss risk and exposure.

Inferred read-only

defi_token_prices

Price arbitrary on-chain tokens with DefiLlama's coins API, addressed as chain:address (or coingecko:id), returning price in USD, symbol, decimals, a confidence score and the pricing timestamp for each.

Inferred read-only

polymarket_markets

List live Polymarket markets ordered by volume or liquidity, each with its question, Gamma id, condition id, every outcome with its USDC price and CLOB token id, best bid/ask, last trade price, volume, liquidity and end date.

Potential side effects

polymarket_events

List Polymarket events — the grouped questions such as an election or a rate decision — ordered by volume, each with title, slug, end date, volume, 24h volume, liquidity, open interest, its full market count and the priced member markets themselves.

Inferred read-only

polymarket_market

One Polymarket market by Gamma id, slug or condition id, with its full outcome pricing and the LIVE CLOB order book for each outcome token: best bid, best ask, midpoint, spread and the top price levels with sizes.

Inferred read-only

polymarket_trades

Recent public trade prints for one Polymarket market, addressed by its condition id: timestamp, side, outcome, price, size, notional in USD, the trader's published pseudonym and wallet, and the transaction hash.

Potential side effects

polymarket_leaderboard

Polymarket's public trader leaderboard by traded volume or realised profit over a 1d, 7d, 30d or all-time window, returning each trader's rank, published pseudonym and display name, wallet address and USDC amount.

Inferred read-only

manifold_markets

Search or browse Manifold Markets questions, returning each one's probability, outcome type, volume, liquidity, unique bettor count, close time, creator and resolution state.

Inferred read-only

prediction_market_search

Find a prediction market by question text across two venues at once — Polymarket (USDC, real money) and Manifold (MANA, play money) — returning a single normalised list with the venue, its currency, the question, the YES probability, volume, end date and a direct URL, plus a per-venue status so a venue that failed is visible rather than silently dropped.

Inferred read-only

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.com-mcpscores-macro-market-data]
url = "https://mcpfax-markets.bowling-anthony.workers.dev/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "com-mcpscores-macro-market-data": {
      "type": "http",
      "url": "https://mcpfax-markets.bowling-anthony.workers.dev/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: com-mcpscores-macro-market-data
Remote MCP URL: https://mcpfax-markets.bowling-anthony.workers.dev/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "com-mcpscores-macro-market-data": {
      "url": "https://mcpfax-markets.bowling-anthony.workers.dev/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "com-mcpscores-macro-market-data": {
      "type": "http",
      "url": "https://mcpfax-markets.bowling-anthony.workers.dev/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "com-mcpscores-macro-market-data",
  "transport": "streamable-http",
  "url": "https://mcpfax-markets.bowling-anthony.workers.dev/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

ENDPOINT 3

https://mcpfax-utility.bowling-anthony.workers.dev/mcp

No auth detected

MCP server metadata

Name: com.mcpscores/public-data-api
Version: 1.0.3

Capabilities

tools

Server instructions

Public-data utility tools. Paid tools require an x402 payment: send the base64 X-PAYMENT header on this POST /mcp request, or call the equivalent GET endpoint. tools/list is free.

Known tools 31

v1_geocode

Forward geocoding: Place name → coordinates, country, timezone.

Inferred read-only

v1_reverse_geocode

Reverse geocoding: Coordinates → nearest address.

Inferred read-only

v1_timezone

Timezone by coordinate: Coordinates → IANA timezone, UTC offset, local time.

Inferred read-only

v1_zip

Postal code lookup: ZIP/postal code → place(s) & coordinates.

Inferred read-only

v1_airports_nearest

Nearest airports: Coordinates → nearest airports (IATA/ICAO) by distance.

Inferred read-only

v1_ip_geolocation

IP geolocation: IP address → location, ASN, ISP.

Inferred read-only

v1_country

Country metadata: Name/ISO code → currency, capital, calling code, languages, flag.

Inferred read-only

v1_weather

Weather forecast: Current conditions + multi-day forecast by coordinate or place.

Inferred read-only

v1_weather_alerts

Active weather alerts: Active NWS watches/warnings for a US coordinate.

Inferred read-only

v1_air_quality

Air quality: US & European AQI plus pollutant concentrations by coordinate.

Inferred read-only

v1_sun

Sunrise / sunset: Sunrise, sunset, solar noon, day length by coordinate.

Inferred read-only

v1_holidays

Public holidays: Public holidays for a country & year.

Inferred read-only

v1_business_days

Business-day math: Count business days in a range, or add/subtract N business days, skipping weekends & holidays.

Inferred read-only

v1_fx

Currency exchange rates: Reference FX rates (ECB) with optional amount conversion.

Inferred read-only

v1_crypto_price

Crypto spot price: Spot price for a crypto asset in a fiat/crypto quote currency.

Inferred read-only

v1_stock_quote

Stock quote: Delayed quote & key stats for an equity/ETF/index.

Inferred read-only

v1_sec_company_facts

SEC EDGAR company facts: Company profile + recent filings; or XBRL financial facts for a concept.

Inferred read-only

v1_inflation

Inflation calculator: Adjust an amount between years using CPI (any country, not just US).

Inferred read-only

v1_econ_indicator

Economic indicator: World Bank indicator time series for a country (GDP, unemployment, etc.

Inferred read-only

v1_lei

LEI lookup: Legal Entity Identifier record by LEI code or entity name.

Inferred read-only

v1_vin_decode

VIN decode: Decode a US-market Vehicle Identification Number.

Inferred read-only

v1_icd10

ICD-10-CM search: Search ICD-10-CM diagnosis codes by term or code.

Inferred read-only

v1_naics

NAICS lookup: Official 2022 NAICS code → title, hierarchy, children; or keyword search.

Inferred read-only

v1_cfr

CFR legal text: Fetch current Code of Federal Regulations text for a citation.

Inferred read-only

v1_drug_label

FDA drug label: openFDA structured drug labeling (uses, warnings, dosage).

Inferred read-only

v1_wikipedia

Wikipedia summary: Lead summary/extract for a Wikipedia page.

Inferred read-only

v1_unit_convert

Unit conversion: Convert between units (length, mass, volume, speed, area, data, time, pressure, energy, temperature, angle).

Inferred read-only

v1_dns

DNS lookup: Resolve DNS records via DNS-over-HTTPS.

Inferred read-only

v1_rdap

RDAP whois: Structured domain/IP registration data (modern whois).

Inferred read-only

v1_robots

robots.

Inferred read-only

v1_validate_email

Email validation: Syntax check + live MX/deliverability + disposable-domain flag.

Potential side effects

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.com-mcpscores-public-data-api]
url = "https://mcpfax-utility.bowling-anthony.workers.dev/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "com-mcpscores-public-data-api": {
      "type": "http",
      "url": "https://mcpfax-utility.bowling-anthony.workers.dev/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: com-mcpscores-public-data-api
Remote MCP URL: https://mcpfax-utility.bowling-anthony.workers.dev/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "com-mcpscores-public-data-api": {
      "url": "https://mcpfax-utility.bowling-anthony.workers.dev/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "com-mcpscores-public-data-api": {
      "type": "http",
      "url": "https://mcpfax-utility.bowling-anthony.workers.dev/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "com-mcpscores-public-data-api",
  "transport": "streamable-http",
  "url": "https://mcpfax-utility.bowling-anthony.workers.dev/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

ENDPOINT 4

https://mcpfax-intel.bowling-anthony.workers.dev/mcp

No auth detected

MCP server metadata

Name: com.mcpscores/x402-market-intelligence
Version: 1.0.3

Capabilities

tools

Server instructions

Market intelligence on the x402 economy, from a continuously collected observation archive: seller ranking, trending and newly seen services, category demand, sudden movers, and a full market report. Tool calls are x402-paid in USDC on Base — send the base64 X-PAYMENT header on this POST /mcp request (or params._meta['x402/payment']). PRICES DIFFER PER TOOL, from $0.003 to $0.50, so read the price out of tools/list before you call. An unpaid call returns a PaymentRequired result carrying the x402 accepts challenge and settles nothing; initialize, ping and tools/list are free. Every figure is an OBSERVATION with a date, never an estimate, and an empty result means the archive holds nothing matching, not that nothing exists.

Known tools 6

x402_market_report

Daily state of the x402 agent economy: observed USDC inflow, seller ranking, category demand, growth, and coverage.

Inferred read-only

x402_seller_rank

Leaderboard of x402 sellers by observed USDC inflow, with distinct payers, an HHI concentration measure and wash-risk flags.

Inferred read-only

x402_trending_services

Services whose inbound USDC transfer count and inflow are growing across comparable daily windows.

Potential side effects

x402_new_entrants

x402 services first listed since a given date, with first archive observation and early-traction evidence from observed inflow.

Inferred read-only

x402_category_demand

Unmet-demand finder: compares observed USDC spend against how many sellers actually serve each category, with recent momentum where a real prior window exists.

Inferred read-only

x402_top_movers

Early-warning feed of sudden daily inflow spikes plus strictly qualified first-window large-payer signals.

Inferred read-only

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.com-mcpscores-x402-market-intelligence]
url = "https://mcpfax-intel.bowling-anthony.workers.dev/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "com-mcpscores-x402-market-intelligence": {
      "type": "http",
      "url": "https://mcpfax-intel.bowling-anthony.workers.dev/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: com-mcpscores-x402-market-intelligence
Remote MCP URL: https://mcpfax-intel.bowling-anthony.workers.dev/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "com-mcpscores-x402-market-intelligence": {
      "url": "https://mcpfax-intel.bowling-anthony.workers.dev/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "com-mcpscores-x402-market-intelligence": {
      "type": "http",
      "url": "https://mcpfax-intel.bowling-anthony.workers.dev/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "com-mcpscores-x402-market-intelligence",
  "transport": "streamable-http",
  "url": "https://mcpfax-intel.bowling-anthony.workers.dev/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

ENDPOINT 5

https://faultcode-diagnostic-mcp.bowling-anthony.workers.dev/mcp

No auth detected

MCP server metadata

Name: com.mcpscores/vehicle-fault-codes
Version: 1.0.1

Capabilities

tools.listChanged

Server instructions

Vehicle fault-code definitions and official NHTSA document evidence, priced per call in USDC on Base. Tool calls cost $0.002-$0.005 and are CHARGED ONLY when the catalog returns a definition or document evidence; a code it has neither of is answered in full and costs $0. To pay, send the base64 X-PAYMENT request header on the POST /mcp request, or params._meta['x402/payment'] on tools/call. Both are accepted. initialize, ping and tools/list are free. Diagnostic definitions and official-document observations are evidence, not a repair prescription. Vehicle jobs run only on a paired iOS device. clear_dtcs always requires a fresh confirmation on that device.

Known tools 8

lookup_dtc

Return source-attributed generic and make-specific definitions for a five-character P/B/C/U code.

Inferred read-only

search_diagnostics

Search bounded, source-attributed DTC definitions by description text or by DTC code.

Inferred read-only

get_catalog_attributions

Return the source, license, URL, required notice, and build role for every diagnostic catalog input.

Inferred read-only

find_service_bulletins

Find official NHTSA-hosted manufacturer service-bulletin summaries that explicitly mention a code, most recent first.

Inferred read-only

list_catalog_vocabulary

Enumerate the exact vehicle names the catalog stores, so a filter can be built instead of guessed.

Inferred read-only

get_catalog_status

Probe the catalog database and report whether it holds data.

Inferred read-only

lookup_typed_code_observations

Return typed, source-linked observations for extended SAE/UDS-style or OEM-native identifiers.

Inferred read-only

lookup_j1939_observations

Return source-linked J1939 SPN or SPN/FMI observations without presenting them as complete definitions.

Inferred read-only

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.com-mcpscores-vehicle-fault-codes]
url = "https://faultcode-diagnostic-mcp.bowling-anthony.workers.dev/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "com-mcpscores-vehicle-fault-codes": {
      "type": "http",
      "url": "https://faultcode-diagnostic-mcp.bowling-anthony.workers.dev/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: com-mcpscores-vehicle-fault-codes
Remote MCP URL: https://faultcode-diagnostic-mcp.bowling-anthony.workers.dev/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "com-mcpscores-vehicle-fault-codes": {
      "url": "https://faultcode-diagnostic-mcp.bowling-anthony.workers.dev/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "com-mcpscores-vehicle-fault-codes": {
      "type": "http",
      "url": "https://faultcode-diagnostic-mcp.bowling-anthony.workers.dev/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "com-mcpscores-vehicle-fault-codes",
  "transport": "streamable-http",
  "url": "https://faultcode-diagnostic-mcp.bowling-anthony.workers.dev/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

ENDPOINT 6

https://grocery-basket.bowling-anthony.workers.dev/mcp

No auth detected

MCP server metadata

Name: com.mcpscores/cheapest-grocery-basket
Version: 1.0.0

Capabilities

tools

Server instructions

Answers where a whole grocery list should be bought today, using real local store prices collected from each retailer's own storefront. Tool calls are x402-paid in USDC on Base — send the base64 X-PAYMENT header on this POST /mcp request (or params._meta['x402/payment']). find_product costs $0.01; price_basket costs $0.05; cheapest_basket costs $0.20 and is the one that answers the whole question, so prefer it over calling find_product per item. An unpaid call returns a PaymentRequired result carrying the x402 accepts challenge and settles nothing; initialize, ping and tools/list are free. Coverage is explicit: an uncovered ZIP or unknown product returns an error and is NOT charged, never a guess. Delivery fees, order minimums and loyalty-card prices are not collected yet and come back null rather than estimated.

Known tools 3

find_product

Compare a single grocery item across every collected store in a ZIP.

Inferred read-only

price_basket

Price an entire shopping list at every collected store in a ZIP, one complete basket per store.

Inferred read-only

cheapest_basket

The complete buying decision for a shopping list: the cheapest single store that can fill it, AND the cross-store optimum that buys each line wherever it is cheapest, with the dollar savings between them and how many stops that costs.

Inferred read-only

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.com-mcpscores-cheapest-grocery-basket]
url = "https://grocery-basket.bowling-anthony.workers.dev/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "com-mcpscores-cheapest-grocery-basket": {
      "type": "http",
      "url": "https://grocery-basket.bowling-anthony.workers.dev/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: com-mcpscores-cheapest-grocery-basket
Remote MCP URL: https://grocery-basket.bowling-anthony.workers.dev/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "com-mcpscores-cheapest-grocery-basket": {
      "url": "https://grocery-basket.bowling-anthony.workers.dev/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "com-mcpscores-cheapest-grocery-basket": {
      "type": "http",
      "url": "https://grocery-basket.bowling-anthony.workers.dev/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "com-mcpscores-cheapest-grocery-basket",
  "transport": "streamable-http",
  "url": "https://grocery-basket.bowling-anthony.workers.dev/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

ENDPOINT 7

https://mcpfax-diag.bowling-anthony.workers.dev/mcp

No auth detected

MCP server metadata

Name: com.mcpscores/vehicle-fault-codes
Version: 1.1.0

Capabilities

tools

Server instructions

Vehicle fault codes, recalls, technical service bulletins and VIN decoding, from public NHTSA and standards data. Tool calls are x402-paid in USDC on Base — send the base64 X-PAYMENT header on this POST /mcp request (or params._meta['x402/payment']). dtc_lookup costs $0.02; vehicle_recalls, vehicle_tsbs and vin_decode cost $0.005 each. An unpaid call returns a PaymentRequired result carrying the x402 accepts challenge and settles nothing; initialize, ping and tools/list are free, and a call missing a required argument is refused before payment is ever requested. We never guess a code meaning: an unknown DTC returns not_found rather than an invented definition.

Known tools 4

dtc_lookup

Look up what a vehicle fault code (OBD-II diagnostic trouble code) means.

Inferred read-only

vehicle_recalls

Official NHTSA safety recalls for a vehicle.

Inferred read-only

vehicle_tsbs

NHTSA Technical Service Bulletins (manufacturer repair guidance for known defects that are not safety recalls).

Inferred read-only

vin_decode

Decode a Vehicle Identification Number into make, model, model year, body class, engine and plant country using NHTSA's public vPIC database.

Inferred read-only

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.com-mcpscores-vehicle-fault-codes]
url = "https://mcpfax-diag.bowling-anthony.workers.dev/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "com-mcpscores-vehicle-fault-codes": {
      "type": "http",
      "url": "https://mcpfax-diag.bowling-anthony.workers.dev/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: com-mcpscores-vehicle-fault-codes
Remote MCP URL: https://mcpfax-diag.bowling-anthony.workers.dev/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "com-mcpscores-vehicle-fault-codes": {
      "url": "https://mcpfax-diag.bowling-anthony.workers.dev/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "com-mcpscores-vehicle-fault-codes": {
      "type": "http",
      "url": "https://mcpfax-diag.bowling-anthony.workers.dev/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "com-mcpscores-vehicle-fault-codes",
  "transport": "streamable-http",
  "url": "https://mcpfax-diag.bowling-anthony.workers.dev/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

ENDPOINT 8

https://devpkg-intel.bowling-anthony.workers.dev/mcp

No auth detected

MCP server metadata

Name: com.mcpscores/dev-package-intel
Version: 1.0.0

Capabilities

tools

Server instructions

Package facts for agents that write code: latest version, licence, deprecation and known vulnerabilities across npm, PyPI and crates.io, fetched live from each registry plus OSV. Tool calls are x402-paid in USDC on Base — send the base64 X-PAYMENT header on this POST /mcp request (or params._meta['x402/payment']). package_info costs $0.001; package_vulnerabilities $0.002; package_audit $0.004, and package_audit answers 'is this dependency safe to add' in one call, so prefer it over calling the other two separately. An unpaid call returns a PaymentRequired result and settles nothing; initialize, ping and tools/list are free, as are request_data and demand_report. An unknown package returns not_found and is NOT charged. A clean audit verdict means nothing was found in these sources — it is not a security guarantee.

Known tools 5

request_data

FREE, no payment.

Potential side effects

demand_report

FREE, no payment.

Potential side effects

package_info

Look up a package in npm, PyPI or crates.

Inferred read-only

package_vulnerabilities

Known security advisories for a package from OSV, the open advisory database.

Inferred read-only

package_audit

One call that answers whether a dependency is safe to add: latest version, licence, deprecation, advisories affecting the current version, how long since the last release, and a verdict with the specific concerns found.

Inferred read-only

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.com-mcpscores-dev-package-intel]
url = "https://devpkg-intel.bowling-anthony.workers.dev/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "com-mcpscores-dev-package-intel": {
      "type": "http",
      "url": "https://devpkg-intel.bowling-anthony.workers.dev/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: com-mcpscores-dev-package-intel
Remote MCP URL: https://devpkg-intel.bowling-anthony.workers.dev/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "com-mcpscores-dev-package-intel": {
      "url": "https://devpkg-intel.bowling-anthony.workers.dev/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "com-mcpscores-dev-package-intel": {
      "type": "http",
      "url": "https://devpkg-intel.bowling-anthony.workers.dev/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "com-mcpscores-dev-package-intel",
  "transport": "streamable-http",
  "url": "https://devpkg-intel.bowling-anthony.workers.dev/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

ENDPOINT 9

https://feed-reader.bowling-anthony.workers.dev/mcp

No auth detected

MCP server metadata

Name: com.mcpscores/feed-reader
Version: 1.0.0

Capabilities

tools

Server instructions

Parses any RSS, RSS/RDF or Atom feed into one consistent shape, and finds the feed a site declares in its HTML head. Tool calls are x402-paid in USDC on Base: send the base64 X-PAYMENT header on this POST /mcp request (or params._meta['x402/payment']). read_feed and discover_feeds cost $0.001 each. Pass 'since' with your last poll time to get only what is new — the cheap way to watch a source. initialize, ping and tools/list are free, as are request_data and demand_report. A URL that is not a feed returns not_a_feed and is NOT charged.

Known tools 4

request_data

FREE, no payment.

Potential side effects

demand_report

FREE, no payment.

Potential side effects

read_feed

Fetch any RSS, RSS/RDF or Atom feed and get back one consistent shape: title, link, ISO-8601 publication date, author, summary and categories per item, plus the feed's own title and last-build time.

Inferred read-only

discover_feeds

Given a site's normal URL, return the feeds it declares in its HTML head, each with title and type.

Inferred read-only

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.com-mcpscores-feed-reader]
url = "https://feed-reader.bowling-anthony.workers.dev/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "com-mcpscores-feed-reader": {
      "type": "http",
      "url": "https://feed-reader.bowling-anthony.workers.dev/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: com-mcpscores-feed-reader
Remote MCP URL: https://feed-reader.bowling-anthony.workers.dev/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "com-mcpscores-feed-reader": {
      "url": "https://feed-reader.bowling-anthony.workers.dev/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "com-mcpscores-feed-reader": {
      "type": "http",
      "url": "https://feed-reader.bowling-anthony.workers.dev/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "com-mcpscores-feed-reader",
  "transport": "streamable-http",
  "url": "https://feed-reader.bowling-anthony.workers.dev/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

ENDPOINT 10

https://food-facts.bowling-anthony.workers.dev/mcp

No auth detected

MCP server metadata

Name: com.mcpscores/food-facts
Version: 1.0.0

Capabilities

tools

Server instructions

Packaged-food facts by barcode: ingredients, allergens, traces, additives, Nutri-Score, NOVA processing group and per-100g nutrition. Tool calls are x402-paid in USDC on Base: send the base64 X-PAYMENT header on this POST /mcp request (or params._meta['x402/payment']). food_by_barcode costs $0.001. initialize, ping and tools/list are free, as are request_data and demand_report. Data is Open Food Facts, crowd-sourced and openly licensed: coverage is uneven and records can be sparse, so check dataCompleteness and treat null as unknown rather than zero. An unknown barcode returns not_found and is NOT charged.

Known tools 3

request_data

FREE, no payment.

Potential side effects

demand_report

FREE, no payment.

Potential side effects

food_by_barcode

Look up a packaged food by its barcode and get the fields that answer "can this person eat this?

Inferred read-only

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.com-mcpscores-food-facts]
url = "https://food-facts.bowling-anthony.workers.dev/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "com-mcpscores-food-facts": {
      "type": "http",
      "url": "https://food-facts.bowling-anthony.workers.dev/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: com-mcpscores-food-facts
Remote MCP URL: https://food-facts.bowling-anthony.workers.dev/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "com-mcpscores-food-facts": {
      "url": "https://food-facts.bowling-anthony.workers.dev/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "com-mcpscores-food-facts": {
      "type": "http",
      "url": "https://food-facts.bowling-anthony.workers.dev/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "com-mcpscores-food-facts",
  "transport": "streamable-http",
  "url": "https://food-facts.bowling-anthony.workers.dev/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

ENDPOINT 11

https://onchain-toolkit.bowling-anthony.workers.dev/mcp

No auth detected

MCP server metadata

Name: com.mcpscores/onchain-toolkit
Version: 1.0.0

Capabilities

tools

Server instructions

On-chain facts for the seconds before you transact: live gas across Ethereum, Base, Arbitrum, Optimism and Polygon; an ERC-20's decimals and symbol read from the contract; whether a transaction actually succeeded; and an address's balance and next nonce. Tool calls are x402-paid in USDC on Base — send the base64 X-PAYMENT header on this POST /mcp request (or params._meta['x402/payment']). gas_now, token_info and tx_status cost $0.001; address_info $0.002. An unpaid call returns a PaymentRequired result and settles nothing; initialize, ping and tools/list are free, as are request_data and demand_report. An unknown transaction or an address with no contract code is reported honestly and is NOT charged. These values are perishable: call again rather than caching.

Known tools 6

request_data

FREE, no payment.

Potential side effects

demand_report

FREE, no payment.

Potential side effects

gas_now

Live gas price on Ethereum, Base, Arbitrum, Optimism or Polygon — in wei and gwei, plus what a plain 21,000-gas transfer would cost in the native token, which is the number you actually budget with.

Potential side effects

token_info

Read an ERC-20's name, symbol, decimals and total supply straight from the contract on the chain you name, and confirm the address actually has code there.

Inferred read-only

tx_status

Status of a transaction by hash: success, failed or still pending, with the block it landed in, sender and recipient, value moved, gas used, the fee actually paid, and how many logs it emitted.

Inferred read-only

address_info

Native balance, the next nonce to use, and whether the address holds contract code — the three things needed before sending from or to an address.

Inferred read-only

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.com-mcpscores-onchain-toolkit]
url = "https://onchain-toolkit.bowling-anthony.workers.dev/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "com-mcpscores-onchain-toolkit": {
      "type": "http",
      "url": "https://onchain-toolkit.bowling-anthony.workers.dev/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: com-mcpscores-onchain-toolkit
Remote MCP URL: https://onchain-toolkit.bowling-anthony.workers.dev/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "com-mcpscores-onchain-toolkit": {
      "url": "https://onchain-toolkit.bowling-anthony.workers.dev/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "com-mcpscores-onchain-toolkit": {
      "type": "http",
      "url": "https://onchain-toolkit.bowling-anthony.workers.dev/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "com-mcpscores-onchain-toolkit",
  "transport": "streamable-http",
  "url": "https://onchain-toolkit.bowling-anthony.workers.dev/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

ENDPOINT 12

https://url-intel.bowling-anthony.workers.dev/mcp

No auth detected

MCP server metadata

Name: com.mcpscores/url-intel
Version: 1.0.0

Capabilities

tools

Server instructions

Tells you what is really behind a URL before you follow it: the full redirect chain of a shortened or tracked link, what the server says about itself, and the pages a site publishes. Tool calls are x402-paid in USDC on Base: send the base64 X-PAYMENT header on this POST /mcp request (or params._meta['x402/payment']). resolve_url and url_headers cost $0.001; site_pages $0.002. initialize, ping and tools/list are free, as are request_data and demand_report. Security-header presence is a hygiene signal, NOT a safety verdict. An unreachable host, or a site with no sitemap, is reported honestly and is NOT charged.

Known tools 5

request_data

FREE, no payment.

Potential side effects

demand_report

FREE, no payment.

Potential side effects

resolve_url

Follow a URL's redirect chain one hop at a time and report every step: each intermediate host and status, the final destination, whether it crossed to a different host, and a cleaned copy with tracking parameters (utm_*, fbclid, gclid and friends) stripped.

Inferred read-only

url_headers

Response status, server software, content type, caching, and which of the six standard security headers the host sets or omits.

Inferred read-only

site_pages

The pages a site declares in its sitemap, with last-modified dates, located via robots.

Inferred read-only

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.com-mcpscores-url-intel]
url = "https://url-intel.bowling-anthony.workers.dev/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "com-mcpscores-url-intel": {
      "type": "http",
      "url": "https://url-intel.bowling-anthony.workers.dev/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: com-mcpscores-url-intel
Remote MCP URL: https://url-intel.bowling-anthony.workers.dev/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "com-mcpscores-url-intel": {
      "url": "https://url-intel.bowling-anthony.workers.dev/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "com-mcpscores-url-intel": {
      "type": "http",
      "url": "https://url-intel.bowling-anthony.workers.dev/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "com-mcpscores-url-intel",
  "transport": "streamable-http",
  "url": "https://url-intel.bowling-anthony.workers.dev/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

ENDPOINT 13

https://web-extract.bowling-anthony.workers.dev/mcp

No auth detected

MCP server metadata

Name: com.mcpscores/web-extract
Version: 1.0.0

Capabilities

tools

Server instructions

Reads a web page and returns text a model can use — markup, scripts and navigation stripped — or every link on the page resolved absolute. Tool calls are x402-paid in USDC on Base: send the base64 X-PAYMENT header on this POST /mcp request (or params._meta['x402/payment']). read_page and page_links cost $0.002 each. An unpaid call returns a PaymentRequired result and settles nothing; initialize, ping and tools/list are free, as are request_data and demand_report. JavaScript is NOT executed, so a client-rendered page returns its shell and the character count will show that. A site that blocks automated clients is reported honestly and NOT charged.

Known tools 4

request_data

FREE, no payment.

Potential side effects

demand_report

FREE, no payment.

Potential side effects

read_page

Fetch a URL and return its readable text with scripts, styles, navigation and markup stripped, plus the title, description, site name and publication date from the page's own metadata.

Inferred read-only

page_links

Every hyperlink on a page, resolved to absolute URLs, each with its anchor text and whether it stays on the same host.

Inferred read-only

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.com-mcpscores-web-extract]
url = "https://web-extract.bowling-anthony.workers.dev/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "com-mcpscores-web-extract": {
      "type": "http",
      "url": "https://web-extract.bowling-anthony.workers.dev/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: com-mcpscores-web-extract
Remote MCP URL: https://web-extract.bowling-anthony.workers.dev/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "com-mcpscores-web-extract": {
      "url": "https://web-extract.bowling-anthony.workers.dev/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "com-mcpscores-web-extract": {
      "type": "http",
      "url": "https://web-extract.bowling-anthony.workers.dev/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "com-mcpscores-web-extract",
  "transport": "streamable-http",
  "url": "https://web-extract.bowling-anthony.workers.dev/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

ENDPOINT 14

https://mcpscores.com/mcp

No auth detected

MCP server metadata

Name: mcpscores
Version: 1.0.1

Capabilities

tools

Server instructions

Free public reliability ratings for MCP servers and x402 endpoints. No payment or API key. Identify a listing as host:<hostname> or mcp:<publisher>/<name>.

Known tools 2

score_lookup

Full public scorecard for one listing: grade, 0-1000 score, confidence, component breakdown, cited evidence, financial evidence, and coverage limits.

Inferred read-only

top_rated

Highest currently published Model 1.0 ratings across observed MCP servers and x402 endpoints.

Inferred read-only

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.mcpscores]
url = "https://mcpscores.com/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "mcpscores": {
      "type": "http",
      "url": "https://mcpscores.com/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: mcpscores
Remote MCP URL: https://mcpscores.com/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "mcpscores": {
      "url": "https://mcpscores.com/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "mcpscores": {
      "type": "http",
      "url": "https://mcpscores.com/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "mcpscores",
  "transport": "streamable-http",
  "url": "https://mcpscores.com/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

TRUST AND VERIFICATION EVIDENCE

Trust Data Available

BuiltWith Trust API v2 evidence for workers.dev was fetched 2026-08-25T16:44:24.083Z.

Indexed

Evidence is source-attributed and does not guarantee that a third-party server is safe. Risk labels are conservative metadata heuristics.