General Tools

calculiva.com

Plans and consolidates material orders for home renovation projects like flooring, trim, and wallpaper.

1 endpoint4 known toolsFirst detected October 12, 2026Last detected October 12, 2026

ENDPOINT 1

https://mcp.calculiva.com/mcp

No auth detected

MCP server metadata

Name: calculiva-cut-planner
Version: 0.1.0

Capabilities

resources.listChangedtools.listChanged

Known tools 4

plan_trim_order

Plans board and batten, wainscoting or picture frame molding on one wall: spacing, the cut list (miter long and short points for frames) and how many boards of each retail length to buy, with the total length bought and offcut percentage for each stock length; the length to buy is the one that buys the least total length, then the least offcut, then the fewest boards.

Inferred read-only

plan_wallpaper_order

Counts the wallpaper rolls to buy from the walls, doors and windows and the roll label (width, length, pattern repeat, match): drops per roll, every cut placed on its roll, match waste, and the straight / half-drop / random comparison.

Potential side effects

plan_flooring_order

Plans laminate, vinyl plank (LVP) or engineered plank flooring for 1 to 12 rooms, rectangles or L shapes, with the plank size and planks per carton from the carton: cartons to buy, every cut piece traced to its source plank, offcuts carried from one room to the next, the 8 scenarios (direction x offset 1/3 or 1/2 x reuse, plus aligned joints in the chosen direction when offset 0 is chosen) and the best one when no other ties it (fewest cartons, then least offcut, then fewest planks), and how many planks a flat waste allowance would miss.

Inferred read-only

build_order_sheet

Builds one consolidated order sheet from the flooring, trim and wallpaper plans of the same project (pass the same arguments as plan_flooring_order, plan_trim_order and plan_wallpaper_order): cartons, boards per stock length, rolls, total offcuts, the cut list by material and a CSV.

Inferred read-only

CONNECT WITH APPROVAL

Client installation

Review this server and its permissions before adding it. Secret placeholders must be set locally.

Codex

~/.codex/config.toml

[mcp_servers.calculiva-cut-planner]
url = "https://mcp.calculiva.com/mcp"
enabled = true

Claude Code

.mcp.json

{
  "mcpServers": {
    "calculiva-cut-planner": {
      "type": "http",
      "url": "https://mcp.calculiva.com/mcp"
    }
  }
}

Claude Desktop

Settings → Connectors → Add custom connector

Name: calculiva-cut-planner
Remote MCP URL: https://mcp.calculiva.com/mcp

Add this remote URL as a custom connector in Claude Desktop. Availability depends on the user plan and workspace policy.

Cursor

.cursor/mcp.json

{
  "mcpServers": {
    "calculiva-cut-planner": {
      "url": "https://mcp.calculiva.com/mcp"
    }
  }
}

Visual Studio Code

.vscode/mcp.json

Add to Visual Studio Code

{
  "servers": {
    "calculiva-cut-planner": {
      "type": "http",
      "url": "https://mcp.calculiva.com/mcp"
    }
  }
}

Generic MCP

Client-specific MCP configuration

{
  "name": "calculiva-cut-planner",
  "transport": "streamable-http",
  "url": "https://mcp.calculiva.com/mcp"
}

MCP Inspector

Run the official MCP Inspector locally and enter the indexed Streamable HTTP endpoint.

TRUST AND VERIFICATION EVIDENCE

Loading Trust v2 evidence…

Checking the associated registrable domain. The BuiltWith key remains server-side.

Indexed

Evidence is source-attributed and does not guarantee that a third-party server is safe. Risk labels are conservative metadata heuristics.